Availability: | |
---|---|
Quantity: | |
Electric Pneumatic Regulator NITV0000 series●NNT pneumatic component. We have the mature craft and the production line, the corrosion resistant and robust design along with a wide range of options makes it ideal for OEM. ●E/P regulator, Air gripper, Precision regulator, Digital pressure switch, Flow switch, Air cylinder else. ●Our company puts most of energy in product quality inspection and has imported testing equipment to ensure the high quality, so that we can provide a guarantee of our product and then customers can use it trustingly. |
Model | NITV001□ | NITV003□ | NITV005□ | |
Minimum supply pressure | Set pressure +0.1 MPa | |||
Maximum supply pressure | 0.2 MPa | 1.0 MPa | ||
Set pressure range | 0.001 to 0.1 MPa | 0.001 to 0.5 MPa | 0.001 to 0.9 MPa | |
Power supply | Voltage | DC24V ± 10%, DC12~15V | ||
Current consumption | Power supply voltage 24 VDC type: 0.12 A or less Power supply voltage 12 to 15 VDC type: 0.18 A or less | |||
Input signal | Current type | DC 4 to 20 mA, DC 0 to 20 mA (Sink type) | ||
Voltage type | DC 0 to 5 V, DC 0 to 10 V | |||
Input impedance | Current type | Approx. 250 Ω | ||
Voltage type | Approx. 10 kΩ | |||
Output signal(monitor output) | Analog output | DC 1 to 5 V (Output impedance: Approx. 1 kΩ) Output accuracy ± 6% F.S. or less | ||
Linearity | ± 1% F.S. or less | |||
Hysteresis | 0.5% F.S. or less | |||
Repeatability | ± 0.5% F.S. or less | |||
Sensitivity | 0.2% F.S. or less | |||
Temperature characteristics | ± 0.12% F.S./°C or less | |||
Ambient and fluid temperature | 0 to 50°C (No condensation) | |||
Enclosure | IP65 | |||
Connect size | Single unit | Metric size | 1,2,3 : 4 | |
Inch size | 1,2,3 : 5/32'' | |||
Manifold | Metric size | 1,3 : 6 ; 2 : 4 | ||
Inch size | 1,3 : 1/4'' ; 2 : 5/32'' | |||
Weight | 100g or less (without options) |
Laser Cutting Machine | Packing Machine | PCB Machine |
When customers assemble the electric proportional valve and two-way valve, connect the gas pipe, connector and copper pipe, improper operation will produce copper chips, aluminum chips, iron chips, plastic and other particles. These particles will cause damage to the electric proportional valve when they enter into the electric proportional valve, resulting in the slow exhaust or complete failure to close the electric proportional valve, resulting in the digital display of the proportional valve slowly rising after closing, and the air leakage of the cutting head After some joints are processed, it is better to pre blow the pipe before assembly. Another reason for this kind of phenomenon is that the sealing ring of the two-way valve is deformed, resulting in air leakage when the normally open and normally closed diaphragm is not completely closed. |
Factory | Production Line | Test |
Certificate | Team | Contact Us |
About us | |
NNT is devoted to provide high quality industrial pneumatic control components to the domestic and international customers. We've been focusing on products innovation, R&D(research and development) and quality control, which also enables NNT in the peer enjoy a good reputation. This is Jacob. Contact me for product details and attractive price. Whatsapp: +86 17702626719 Wechat: 17702626719 Email: jacob@nntqd.com |
Electric Pneumatic Regulator NITV0000 series●NNT pneumatic component. We have the mature craft and the production line, the corrosion resistant and robust design along with a wide range of options makes it ideal for OEM. ●E/P regulator, Air gripper, Precision regulator, Digital pressure switch, Flow switch, Air cylinder else. ●Our company puts most of energy in product quality inspection and has imported testing equipment to ensure the high quality, so that we can provide a guarantee of our product and then customers can use it trustingly. |
Model | NITV001□ | NITV003□ | NITV005□ | |
Minimum supply pressure | Set pressure +0.1 MPa | |||
Maximum supply pressure | 0.2 MPa | 1.0 MPa | ||
Set pressure range | 0.001 to 0.1 MPa | 0.001 to 0.5 MPa | 0.001 to 0.9 MPa | |
Power supply | Voltage | DC24V ± 10%, DC12~15V | ||
Current consumption | Power supply voltage 24 VDC type: 0.12 A or less Power supply voltage 12 to 15 VDC type: 0.18 A or less | |||
Input signal | Current type | DC 4 to 20 mA, DC 0 to 20 mA (Sink type) | ||
Voltage type | DC 0 to 5 V, DC 0 to 10 V | |||
Input impedance | Current type | Approx. 250 Ω | ||
Voltage type | Approx. 10 kΩ | |||
Output signal(monitor output) | Analog output | DC 1 to 5 V (Output impedance: Approx. 1 kΩ) Output accuracy ± 6% F.S. or less | ||
Linearity | ± 1% F.S. or less | |||
Hysteresis | 0.5% F.S. or less | |||
Repeatability | ± 0.5% F.S. or less | |||
Sensitivity | 0.2% F.S. or less | |||
Temperature characteristics | ± 0.12% F.S./°C or less | |||
Ambient and fluid temperature | 0 to 50°C (No condensation) | |||
Enclosure | IP65 | |||
Connect size | Single unit | Metric size | 1,2,3 : 4 | |
Inch size | 1,2,3 : 5/32'' | |||
Manifold | Metric size | 1,3 : 6 ; 2 : 4 | ||
Inch size | 1,3 : 1/4'' ; 2 : 5/32'' | |||
Weight | 100g or less (without options) |
Laser Cutting Machine | Packing Machine | PCB Machine |
When customers assemble the electric proportional valve and two-way valve, connect the gas pipe, connector and copper pipe, improper operation will produce copper chips, aluminum chips, iron chips, plastic and other particles. These particles will cause damage to the electric proportional valve when they enter into the electric proportional valve, resulting in the slow exhaust or complete failure to close the electric proportional valve, resulting in the digital display of the proportional valve slowly rising after closing, and the air leakage of the cutting head After some joints are processed, it is better to pre blow the pipe before assembly. Another reason for this kind of phenomenon is that the sealing ring of the two-way valve is deformed, resulting in air leakage when the normally open and normally closed diaphragm is not completely closed. |
Factory | Production Line | Test |
Certificate | Team | Contact Us |
About us | |
NNT is devoted to provide high quality industrial pneumatic control components to the domestic and international customers. We've been focusing on products innovation, R&D(research and development) and quality control, which also enables NNT in the peer enjoy a good reputation. This is Jacob. Contact me for product details and attractive price. Whatsapp: +86 17702626719 Wechat: 17702626719 Email: jacob@nntqd.com |